Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Arvada?
Gate parts and welding in Arvada typically run $150 to $650 for common repairs, with most hinge, latch, and bracket jobs landing near $250 to $400. Simple welding repairs like a cracked hinge mount or bent frame usually fall between $180 and $450, while full hardware replacements on a wide driveway gate climb toward $500 to $650. We price every job per job after we’ve looked at the gate, and the written estimate sets the final number.
Gate repair in Arvada splits into a few predictable categories. Small parts (hinges, latches, rollers, stops, and brackets) are cheap, but the labor to fit them on a heavy steel gate is not. Welding adds time and equipment, especially when the metal is old, painted, or rusted through and needs cleaning before a clean bead holds. Electric gate repair sits on top of that when the failure turns out to be in the operator, the control board, or the safety sensors instead of the frame. Sorting out which category your gate falls into is the first thing our technicians do, and it’s why we ask for photos and the brand before we quote. Call (844) 761-1390 and we’ll walk through it with you. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what the common parts-and-welding jobs look like in the Arvada market this year. Treat these as typical ranges, not a fixed menu. Every gate is a little different, and the written estimate is what counts.
| Job | Typical Range | What It Covers |
|---|---|---|
| Hinge replacement (pair) | $150 – $320 | Cut out old hinges, weld or bolt new ones, realign the gate |
| Latch and striker | $120 – $260 | New latch, striker plate, alignment so the gate closes clean |
| Weld repair – cracked hinge mount or frame joint | $180 – $450 | Grind, prep, weld, paint touch-up on steel or aluminum |
| Rollers and track (slide gate) | $200 – $460 | New rollers, track straightening, guide adjustment |
| Full hardware set (hinges, latch, drop rod, stops) | $500 – $650 | Complete replacement on a wide driveway gate |
| Gate frame rebuild (small) | $600 – $1,100 | Re-square the frame, weld new crossbars, repaint |
| Electric gate sensor / safety edge parts | $180 – $420 | Photocell or edge sensor replacement on an automated gate |
| Control board repair or replacement | $280 – $600 | Operator control board, wiring, and diagnostics |
| Access control / keypad and loop detector parts | $250 – $550 | Keypad, card reader, vehicle loop detector on commercial gates |
What pushes a quote toward the top of a range: heavy steel gates that need a lift or careful shoring to weld safely, old metal that’s rusted through and needs cutting back before new material goes on, and any electric gate where the failure crosses from mechanical to electronic. What pulls it down: aluminum gates (easier to weld and lighter to handle), stock parts that fit common brands like LiftMaster, Linear, Ghost Controls, and Mighty Mule, and a gate that’s already accessible on a flat driveway with room to work. If the gate is automated and the failure is in the motor, the board, or the access control, that’s a separate job from the welding, and we quote it that way so you’re not paying for guesswork.
What Affects Gate Parts & Welding Pricing in Arvada
- Gate material. Steel and aluminum weld differently, and both behave differently in Arvada’s freeze-thaw cycles. Steel needs cleaning and preheating in cold months; aluminum needs the right filler and careful heat control. Either way, the material decides how long the job takes, and how long the job takes decides the price.
- Gate weight and size. A single-walk pedestrian gate swings off a couple of hinges and welds up in an hour. A wide steel driveway gate often needs two technicians, a lift, and shoring to hold it while a hinge is cut out. That’s a different job, and it’s priced differently.
- Age and condition of the metal. Gates near the front range see dry summers, wet springs, and cold snaps that crack paint and open seams to rust. A gate that’s been repainted over rust will take longer to prep before a weld will hold. If the metal is too far gone, replacing a small section is often cheaper than trying to weld it back.
- Part availability and brand. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which means most residential and commercial parts are within reach. Exotic or discontinued parts take longer and cost more, and we’ll say so before we start.
- Whether the gate is automated. On an electric gate, a “welding job” often turns out to be a sensor, wiring, or control board problem dressed up as a mechanical one. Our technicians are familiar with all nine brands we service and can tell the difference without guessing.
- Access and site conditions. A gate on a flat driveway with space to park a truck is easier than a gate tucked between a fence and a retaining wall on a slope. Arvada’s older neighborhoods and newer foothills-adjacent builds both have their own quirks. Shorter access means longer labor, and longer labor means a higher quote.
The common thread: labor is the biggest driver. Parts are usually a modest slice of the bill, and the time to fit them correctly on a heavy, awkward gate is what most of the estimate reflects.
How to Save on Gate Parts & Welding
You don’t need to cut corners to keep the bill reasonable. A few choices make a real difference:
- Get the diagnosis right before you buy parts. A lot of “welding jobs” are actually a loose bracket, a bent hinge pin, or a rusted roller. Fixing the actual problem is cheaper than replacing a whole hardware set because the gate sags.
- Repair first, replace second. If a hinge mount has cracked, a weld repair is usually a fraction of a new gate. We’ll tell you when a repair stops making sense, but we don’t default to replacement.
- Group the work. If two hinges are going and the latch is sloppy, replace them together. One visit with several parts is cheaper than three separate visits with several parts.
- Keep the gate painted. A coat of paint on exposed welds and hinges slows rust and keeps the metal sound longer. It’s the cheapest maintenance there is, and it doesn’t require a service plan: we price each repair on its own.
- Ask for a free estimate with photos. Send a few pictures of the gate, the brand of the operator if it has one, and what it’s doing. We can often narrow the likely range before we arrive, and the on-site estimate is free and the written quote sets the final price. Call (844) 761-1390.
One safety note. On an automated gate, the dangerous parts are the operator’s wiring and power and the heavy panels that can crush. A slide gate that’s come off its track is genuinely hazardous. We don’t recommend DIY repair on electric gates, and we don’t recommend welding on a gate that’s still powered. Turn the power off at the breaker and have a trained technician handle it. That’s not upselling; it’s the reason the job is priced the way it is.
Why Arvada Gates Need Different Parts and Welding Than You’d Expect
Arvada sits between the flat metro and the foothills, and that geography shows up in gate failures. Front-range freeze-thaw cycles are hard on metal: water gets into a weld seam, freezes overnight, and opens it a little wider each winter. That’s why cracked hinge mounts and split frame joints are some of the most common welding jobs we see here. Soil movement on sloped lots adds to it, pushing gate posts out of plumb and putting extra stress on hinges, latches, and rollers. If you’re near the older parts of town, gates are more likely to have original steel hardware that’s due for replacement. In newer builds, the gates are often aluminum or lighter steel and the parts are easier to source.
Automatic gates add a second layer. Arvada has a mix of single-family homes with residential-grade operators (Mighty Mule and Ghost Controls are common) and HOAs, apartment complexes, and light-commercial properties running commercial-grade systems from DoorKing, FAAC, BFT, and Viking. When an automated gate stops working, the cause could be the operator, the control board, the safety sensors, the access control, or the mechanical frame itself. Our technicians are familiar with all nine of those brands and can pinpoint the actual failure instead of replacing parts on a hunch. That diagnostic work is often the difference between a $200 parts fix and a $900 guess.
If you’re in Arvada and your gate has cracked a hinge, a latch isn’t catching, or an electric gate has stopped responding, we’re set up to handle it. More on how we work is on our Gate Repair Arvada page.
FAQs – Gate Parts & Welding Cost
How much does gate welding cost in Arvada?
Gate welding in Arvada typically runs $180 to $450 for a cracked hinge mount or frame joint, and $600 to $1,100 for a small frame rebuild. The range depends on the metal, how much prep is needed, and whether the gate has to be shored up while the weld is done. Call (844) 761-1390 for a free estimate. Estimates are free, and the written quote sets the final price.
How much do gate parts cost in Arvada?
Common gate parts in Arvada typically run $120 to $260 for a latch and striker, $150 to $320 for a pair of hinges, and $500 to $650 for a full hardware set on a wide driveway gate. Those ranges include the labor to fit them; stock parts alone are usually a smaller slice of the bill. Call (844) 761-1390 for an exact quote on your gate.
Is it cheaper to repair or replace a gate?
Repair is almost always cheaper than replacement. A weld repair at $180 to $450 or a hardware refresh at $500 to $650 is a fraction of a new gate, and we default to repair first. Replacement only makes sense when the frame is too rusted to hold a weld or the gate has failed structurally in more than one place. Call (844) 761-1390 and we’ll tell you which one applies.
Do you work on electric gate parts and welding?
Yes. Electric gate repair is a specialty here, not a side service. We handle the mechanical parts and welding on the frame, and we also work on the operator, control board, safety sensors, and access control for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means one call covers both the welding and the electronics, and you don’t get handed off. Call (844) 761-1390.
Can you come today?
Same-day service is often possible in Arvada. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. Call (844) 761-1390, and a call outside dispatch hours is booked into the next opening. Estimates are free.
How long do gate parts and welding jobs take?
Most hinge, latch, and small weld jobs finish in one visit. Larger hardware replacements or frame repairs on a heavy steel gate may need a follow-up once parts are on hand. Our technicians have up to experience sorting this out on residential and commercial gates alike. Call (844) 761-1390 for a time estimate on your specific gate.
Do you work on commercial gates and apartment complex gates?
Yes. We service residential-grade systems and commercial-grade platforms like FAAC, BFT, DoorKing, and Viking. If you manage an apartment complex, HOA, or light-commercial property in Arvada, we can diagnose whether the failure is the operator, the access control, the safety sensors, or the mechanical frame. Call (844) 761-1390 for a free estimate.
Get a Free Estimate on Your Gate
If your gate is sagging, a hinge has cracked, the latch won’t catch, or an automated gate has stopped responding, the fastest way to know the price is to call. We’ll look at the gate, tell you what’s actually wrong, and give you a written estimate before any work starts. Repair first, replace only when it makes sense, and one vendor for the welding and the electronics. Call (844) 761-1390. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. For more on our Arvada coverage, see our Arvada service area page.
Written by the team at Gate Repair Arvada.
Pricing reflects the Arvada market as of 2026. Gate Repair Arvada offers free estimates – call (844) 761-1390.
What Our Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amanda Ziegler"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ebony Jackson"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Herrera