Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Lakewood
If your gate won’t open, drags through its arc, or jams on a frosty morning, call (844) 761-1390. Gate Repair Arvada works on gates throughout Lakewood, from the older blocks along the US-6 and Alameda corridors to the apartment complexes off Kipling, and we know how this town’s soil and weather treat gate hardware. Our technicians have up to experience, and they diagnose across the motor, the control board, the safety sensors, and the structure instead of guessing. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the price is written and agreed before any work starts.
Why Lakewood Homeowners Call Gate Repair Arvada for Gate Repair
We serve Lakewood as a gate specialist, not a handyman outfit that adds gates to the list. That matters here, because the gate market in Lakewood is dominated by aging mid-century suburban properties on long driveways where the original wrought-iron and chain-link gates now deal with two problems at once: posts thrown out of plumb by shale-heavy soil and rust pushed along by snowmelt pooling at the base. We see that pattern repeatedly, and we plan for it rather than treating it as an oddity.
Our technicians are fluent across nine gate brands, from residential-grade Ghost Controls and Mighty Mule to commercial-grade DoorKing, FAAC, BFT, and Viking, which means most gates in Lakewood get a straight diagnosis instead of a brand-loyal guess. We cover residential and commercial, manual and automated, and the work stays inside our lane: gate repair, electric gate repair, and gate installation. If a gate needs a reset post, a new board, and a hinge rebuild, it’s one conversation with one vendor. You can see the full scope of what we handle on our gate repair team page.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Lakewood
Driveway Gate Repair in Lakewood starts with the post, because on most of these properties the gate problem is a footing problem wearing a hardware disguise. Along the US-6 and Alameda corridors, the soil is expansive clay and shale, and our freeze-thaw cycles heave and rotate gate posts more than in neighboring Denver, where newer infill tends to sit on deeper, engineered footings. On many properties with long driveways, a heavy-duty swing gate on a LiftMaster or FAAC operator begins dragging or reversing mid-travel. The usual cause is a hinge post that has heaved in clay soil, throwing the gate out of plumb and binding the operator. A qualified local pro typically resets the post footing, corrects the sag, and verifies the operator’s safety photocells and loop detector before running the gate through a full cycle. A typical driveway gate repair in Lakewood runs $200 – $450 depending on whether the footing needs to come out.
Resetting Heaved Posts
Once the ground moves, the gate follows. We re-set the footing to a proper depth, plumb the post, and check that the gate swings clear of its strike and stops without flexing the operator arm.
Hinge and Hardware Rebuild
Rusted or seized hinge hardware is common on older steel gates. We free the pivot points and rebuild what has worn past its service life so the gate moves smoothly again.
Gate Welding in Lakewood
Gate Welding in Lakewood is usually requested when snowmelt pooling at the base has rusted through frame joints and dropped pickets, or when a post has shifted and cracked the welds that held the panel square. Welding on a gate takes more than a welder; it takes someone who understands how the repaired section will move under the operator’s force once the gate is back in service. We clean the rust back to sound metal, weld the structural joints, and check that the gate hasn’t lost its plane. Weld and rust repair on a typical Lakewood driveway gate runs $150 – $400, and heavy wrought-iron panels can land above that.
Rust Treatment at the Base
Front Range snowmelt pools where a gate meets the ground, so that’s where rust starts. We address the base joints first and treat the surrounding metal instead of painting over corrosion.
Frame and Joint Repair
Long gates flex more than short ones, and bent frames show up as scratches and skip marks on the drive. We square the frame and rebuild the joints so the gate tracks true.
Trusted Brands We Service in Lakewood
We work on your brand, not the other way around. Lakewood properties come with Linear slide operators on older complexes, Viking and DoorKing systems on multi-unit entries, Ghost Controls on rural-style driveways, plus LiftMaster, FAAC, BFT, Elite, and Mighty Mule. Our diagnostic training covers each of those platforms, and we specialize in the electric side: circuit boards, control panels, loop detectors, safety photocells, and motor assemblies that general handymen decline. We don’t stock parts, so call before you assume a board is unavailable. Our aim is fast turnaround through knowing where to look, not brand loyalty.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Lakewood Homes
- Hinge posts heave in clay. The shale-heavy soil and freeze-thaw cycles rotate posts out of plumb, and the gate binds and strains the operator. This is the most common repair we run in Lakewood.
- Rack-and-pinion hardware rusts at the base. Snowmelt pooling around a slide gate’s track and pinion seizes the moving parts. Freeing and rebuilding them is routine on older installations.
- Safety photocells and loop detectors fail. Freeze-thaw cycling and moisture reach the sensors over time. A gate left without entrapment protection is a liability on any automated entrance.
- Solar openers jam in cold mornings. Battery voltage drops with temperature, and a gate that opened easily the afternoon before won’t budge after a cold night. We check the whole solar chain before blaming the operator.
Pricing for Gate Repair in Lakewood, CO
A typical driveway gate repair in Lakewood runs $200 – $450. Weld and rust repair starts around $150 and reaches $400 for heavier wrought-iron panels. Post resetting, hinge rebuilds, and operator diagnostics each add to the total, and heavy commercial operators on multi-unit properties land above those figures. What drives the difference: whether a footing gets redone, how much rust has reached structural joints, and whether the failure is in the mechanics, the control board, or both. We walk the property, explain what we found, and give you a written price before anyone touches a tool. Electrical wiring and gate operator power carry real risk, so this part is for trained hands. The written estimate sets the final price. Call (844) 761-1390 for a free estimate.
We Also Serve Cities Near Lakewood
Lakewood sits in the middle of our service area, and we connect homeowners with independent local pros in the towns around it. That includes Arvada, Denver, Westminster, and Highlands Ranch. If you’re just outside the Lakewood line, call and we’ll tell you what’s covered. You can read more about our reach on the Lakewood area page.
Serving Lakewood, CO – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lakewood
The post keeps leaning because the soil, not the post, is the problem. Lakewood’s expansive clay and shale swell and shrink with each freeze-thaw cycle, and a post set at shallow depth gets rotated out of plumb again and again. The fix is resetting the footing to proper depth, not shimming the gate. Call (844) 761-1390 for a free estimate.
Cold overnight temperatures drop battery voltage and stiffen mechanical parts, so a weak solar setup that ran fine in afternoon warmth can fail at dawn. The fix is usually in the battery, the solar charge, or a hinge that has started to seize. Call (844) 761-1390 and we’ll diagnose the whole chain rather than replacing the operator blindly.
An automatic gate needs working entrapment protection, usually safety photocells plus a loop detector or equivalent. You can test a photocell by breaking the beam while the gate is moving. If it doesn’t reverse, the protection is failing, and that’s a safety problem, not a nuisance. Call (844) 761-1390 for a same-day check where we can schedule it.
Yes – heavy wrought-iron on long driveways is common here, and it’s usually a post-and-weld job. Long gates flex more, and when a post shifts the welds crack. We reset the post, weld the frame back to square, and check the operator’s force settings so the gate moves without straining. Call (844) 761-1390 for a free estimate.
A slide gate that skips usually has a worn pinion gear, debris on the track, or a track that has shifted out of line. On Lakewood properties, pooling snowmelt and rust in the rack assembly are frequent culprits. The components are replaceable. Call (844) 761-1390 and we’ll tell you which part is failing before quoting a fix.
Every gate in Lakewood deals with the same soil and the same seasons, and you don’t need a generalist guessing at it. Call (844) 761-1390 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Licensed and insured, with upfront pricing agreed before any work starts.
Written by the team at Gate Repair Arvada.