Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Denver
If a driveway gate in Denver has stopped opening, is reversing halfway through travel, or won’t respond to the remote, we can help. Gate Repair Arvada handles electric gate repair for homeowners and property managers across Denver, from brick bungalow blocks in Park Hill to newer subdivisions on the east side. Electric gate repair is a specialty here, not a side service: we diagnose the operator, the control board, the safety sensors, and the mechanical structure rather than guessing. Our technicians have up to experience, and we’re comfortable with the brands you actually own. Call (844) 761-1390. We answer 24/7, and fast dispatch runs from 7am to 7pm.
Why Denver Homeowners Call Gate Repair Arvada for Electric Gate Repair
Denver gates take a beating, and the fixes that last come from understanding the place rather than replacing whatever part looks worn. We’re fluent in the brands that dominate this market, from Mighty Mule and Ghost Controls on residential drives to LiftMaster and FAAC on heavier systems, so we know the failure points before we arrive. A large share of our Denver work is on gates installed in the last decade or two, where a builder-grade operator sits on a hinge post that was never sized for powered travel. That’s the pattern. We don’t reach for a new operator until we’ve confirmed the post, footing, and hinges are sound.
We serve Denver and surrounding communities across the metro, and we treat a gate that’s been cabled open or locked off as an urgent call. Safety gear, code-required sensors, and the power connection all get checked on the same visit where the operator gets serviced. If a gate has been reversed by wind or a hail-driven panel impact, we look at both the electronics and the frame before calling it a parts problem. Call (844) 761-1390 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Denver
Electric Gate Motor work in Denver usually means one of two things: a motor that has failed outright, or a motor that’s fine but fighting a gate that binds, sags, or stalls short of the limit switch. Both look like “the motor is bad” from the driver’s seat, and only a diagnostic visit sorts them out. On the newer east-side subdivisions, we see undersized posts and no conduit stub, so the motor can’t run reliably even when it’s new. A typical motor or operator service call in Denver runs $180 to $420 in parts and labor, and a full motor replacement on a residential swing gate runs $650 to $1,400. The written estimate sets the final price, and we quote before any work starts.
Motor Failures and Operator Stalls
An operator that stalls, reverses, or trips the breaker is telling you something. We check the motor windings, capacitor, and control board, then test the mechanical travel so we don’t replace a motor that a hinge adjustment would fix.
Operator Replacement
When a residential operator is past saving, we match the replacement to the gate weight and duty cycle, not just the brand. A heavy steel driveway gate and a light aluminum panel on a vinyl fence need different operators.
Gate Access Control in Denver
Gate Access Control in Denver covers the boards, keypads, remotes, loop detectors, and safety photocells that tell the operator when to open and when to stop. When a remote stops working, the operator is often blamed for a bad receiver card, a dead keypad, or a safety sensor knocked out of alignment by a winter of freeze-thaw. On infill lots around Montclair and South Park Hill, we also see wireless keypad retrofits that were installed without a proper power run to the post, so the whole system goes intermittent. Diagnostic visits for access control in Denver run $120 to $250, and a keypad or receiver board replacement typically runs $180 to $400. A hailstorm that knocks a loop detector loose or a safety senor out of line is a common call here. We quote before any work starts.
Keypads, Remotes, and Receivers
We test the receiver, the remote batteries, and the keypad wiring individually so we don’t replace all three when one has failed. Programming new remotes to LiftMaster and Linear operators is routine.
Safety Sensors and Loops
Photocells and loop detectors are the parts a stalled gate most often trips on. We verify they trip cleanly after every repair, since a gate that closes on a car or a person is a liability, not just an inconvenience.
Trusted Brands We Service in Denver
We service nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in Denver because the residential east-side buildout and the older core neighborhoods run different equipment. FAAC and DoorKing dominate HOA entrances and light commercial systems; LiftMaster and Linear show up on residential driveway gates; Mighty Mule and Ghost Controls sit on lower-cost installs that still need competent service. We don’t carry parts stock in trucks or a warehouse. What we do is diagnose the exact make and model on site, tell you what’s wrong, and get the right part ordered. If you’re unsure of your brand, we’ll identify it from the operator label. Call (844) 761-1390.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Denver Homes
- Builder-grade operators on new-build aluminum and vinyl gates. The hinge post and footing on many newer east-side and far-northeast subdivisions (80230, 80239) were set for a manual panel, not powered travel. When the operator was added, nobody upsized the post, so it sags, binds, and trips within a season or two.
- No conduit or dedicated power run. Plenty of Denver gates were never stubbed for automation during the build. The operator gets installed anyway, using an undersized line or an extension cord, and the system goes intermittent. A qualified pro has to add a proper power run and post footing before the operator works reliably.
- Front Range hail and wind racking. A hail cell that rolls off the foothills can rack a gate out of plumb and bend a hinge, so the operator trips on a bound panel rather than a bad board. We see this most on ornamental iron and steel drive gates that catch the wind. This isn’t a storm-damage call in disguise – it’s the operator being blamed for a mechanical problem.
- Freeze-thaw seizing hinges and loosening mounts. Denver’s 40-degree temperature swings in a day loosen operator mounts and stiffen steel hinges. The gate still opens, but the motor labor is harder and the limit switches drift. Catching it early saves a motor.
Pricing for Electric Gate Repair in Denver, CO
Denver pricing for electric gate repair depends on the operator, the gate weight, and what’s actually failing. Typical figures: a diagnostic visit runs $120 to $250; motor or operator repair runs $180 to $420; full residential motor replacement runs $650 to $1,400; control board repair runs $220 to $500; safety sensor or loop repair runs $150 to $350; and a power run to the gate, where no conduit exists, adds $400 to $1,200 depending on distance and trenching. Commercial DoorKing and FAAC systems run higher because the parts and duty cycles are heavier. The written estimate sets the final price, and we quote before any work starts. Call (844) 761-1390 for a free estimate.
We Also Serve Cities Near Denver
Gate Repair Arvada serves Denver and surrounding communities, including Westminster, Thornton, Lakewood, and Arvada. If your gate sits just outside the Denver city line or on a property that straddles a suburb, we can still diagnose and repair it. Our electric gate repair team covers residential and commercial gates across the metro. Visit our Denver page for more on our local service. Call (844) 761-1390 to book an estimate.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Denver
Usually not. The reversing is typically a symptom of a hinge post that was never sized for powered travel, so the gate binds and the operator trips its safety limit. The fix is mechanical: true the post and footing, correct the sag, then verify the photocell and loop actually trip. A diagnostic visit runs $120 to $250 in Denver, and the written estimate sets the final price.
Often yes, but the gate and post have to be checked first. A manual gate that worked fine by hand can fail quickly under an operator if the hinge post is undersized or the footing is shallow. In many Denver subdivisions we also have to add a power run, since no conduit was stubbed during construction. A free estimate tells you what’s needed before you commit.
Denver automatic gates need entrapment protection – typically photocells and, on some commercial and HOA systems, a loop detector – so the gate reverses or stops if a person, vehicle, or object is in the path. We check and verify this on every repair visit. Ask your city’s building department about current permit requirements for your specific gate.
Hail and wind storms in Denver’s Front Range belt routinely rack gates out of plumb and bend hinges, so the operator trips on a bound panel rather than a failed motor. In other cases a safety sensor gets knocked out of alignment or a loop detector lifts. Wind-driven hail also loosens operator mounts. We diagnose the cause before ordering parts, so the fix actually holds through the next storm.
Not usually. A sagging gate in Denver is most often a footing or hinge-post issue, not a panel that’s worn out. Repairing the footing, re-truing the post, and re-tensioning the hinges or rack is cheaper than a new panel. Call (844) 761-1390. Estimates are free, we answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
If an electric gate in Denver has stopped working or never worked reliably, call (844) 761-1390 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm. Our technicians have up to experience across nine gate brands, and we handle the diagnosis, the repair, and a new installation if you need one.
Written by the team at Gate Repair Arvada.