Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Denver
If your driveway gate won’t close, hangs crooked, or your operator quit after the last storm, we can help. Gate Repair Arvada works on manual and automated gates throughout Denver, and we specialize in the brand-specific fixes most general handyman outfits turn down. Our technicians have up to experience, and they diagnose the actual failure before anyone recommends a replacement. Whether you’re in a newer east-side development or an older brick bungalow block, we know how gates in this city fail. Call (844) 761-1390. We answer 24/7, with fast dispatch from 7am to 7pm.
Why Denver Homeowners Call Gate Repair Arvada for Gate Repair
We’ve built our reputation in Denver on two things: knowing the equipment and showing up with a plan. When you call about a LiftMaster or FAAC operator that’s acting up, you get a technician who understands that platform, not someone guessing from a manual. That focus is why property managers and homeowners across the metro keep our number.
We serve Denver and the surrounding communities, including Denver neighborhoods from the older core out to the newer developments on the east side. Local knowledge matters because a gate in this city takes a beating: hail, wind, swelling temperature swings, and intense high-altitude sun all work on hinges and operators year after year. We’ve watched how that plays out here.
Our gate repair work covers diagnosis, repair, and new installation, so you don’t get handed off to a second contractor when a job grows. Electric gate repair is a specialty here, not a side service. We handle circuit boards, control panels, loop detectors, and motor assemblies that other trades won’t touch. Free estimates, upfront pricing, and the price is quoted and agreed before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Metal Gate Repair in Denver
Metal Gate Repair in Denver is often about storm recovery and correcting a footing that never got set right. When hail-driven wind racks a steel or aluminum gate, the frame twists out of plumb and the hinges bind, and an operator can trip because the gate can’t travel its track cleanly. We straighten, realign, re-weld, and reset posts in proper concrete. A typical hinge and post repair in Denver runs $250 to $600, and a realignment job usually lands between $150 and $450.
Weld and Rust Work
Older wrought-iron and steel gates around the city rust at the joints and at the weld where the hinge meets the frame. We repair those welds and treat the rust so the gate stops shedding metal and starts swinging true again. Rust repair is usually $150 to $400 depending on how much metal needs rebuilding.
Post and Alignment Corrections
Builder-grade aluminum gates in the far-northeast development zones tend to fail at the hinge post first, because freeze-thaw cycles loosen the footing while UV degrades the moving parts. Resetting a post in proper concrete addresses the cause rather than propping up the symptom. We check plumb and travel before we call the job done.
Wood Gate Repair in Denver
Wood Gate Repair in Denver is mostly a story of sun and dry air. The core neighborhoods are full of wood gates hung on aging masonry or concrete piers, and intense UV plus low humidity dries the boards, cracks the grain, and grays the finish faster than homeowners expect. When that wood also soaks up spring moisture and then dries hard, hinges pull loose and the gate sags. Typical wood gate repair in Denver runs $200 to $550.
Hinge and Post Reinforcement
After a hail-and-wind storm torques a wood gate out of plumb, the hinge post is usually the weak point. We reinforce the post, replace fatigued hardware, and rehang so the gate closes square. On gates anchored to old masonry, we assess the pier before we start so the fix holds through the next freeze-thaw swing.
Crack and Finish Repair
Filling cracks and resealing the wood buys years of life and slows the graying that happens under this much sun. We repair the board damage that’s already started and set the gate up to weather the next season. It’s cheaper than replacement and usually the right first move.
Trusted Brands We Service in Denver
We work on your brand, and we’re fluent across nine gate platforms spanning entry-level residential to heavy-duty commercial: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Denver, where a new build might carry a builder-grade Mighty Mule operator while an HOA or light-commercial property runs a FAAC or DoorKing system. Cross-brand diagnostic ability means we figure out whether the failure sits in the operator, the access control board, the safety sensors, or the mechanical structure, without defaulting to brand loyalty. We don’t overpromise parts on hand; we confirm what’s needed, order it, and give you a clear timeline. Fluent across residential or commercial, manual or automated.
Common Gate Repair Problems We See in Denver Homes
- Sagging builder-grade aluminum gates. In newer east-side developments, freeze-thaw cycles loosen hinge post footings fast and UV degrades the operator’s plastic parts, so a gate that’s about a year old starts dragging.
- Dry, cracked, and sagging wood gates. In the brick bungalow neighborhoods of the older core, intense sun and dry air dry wood gates until hinges pull loose from aging piers.
- Hail-driven wind damage. After a Front Range hail cell rolls off the foothills, we get calls about driveway gates torqued out of plumb and hinges bound so tight the operator keeps tripping.
- Operators tripping without entrapment protection. Many older automated gates in Denver lack proper safety photocells and a loop detector, so a binding gate trips the operator or, worse, closes without sensing an obstruction.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Denver, CO
Here’s what gate repair typically costs in Denver. A hinge and post repair generally runs $250 to $600. Gate realignment is usually $150 to $450. Rust and weld repair lands between $150 and $400. Wood gate repair runs $200 to $550, and an electric gate repair on a frozen control board or failed motor assembly typically ranges from $300 to $900 depending on the part. If your gate was installed manual and you want it automated, the added power run or a solar retrofit changes the scope, and we’ll explain both paths.
What moves the price: how far the gate’s out of plumb, whether the footing needs resetting, whether the operator needs a part, and how much repair versus replacement makes sense. Estimates are free, and the price is quoted and agreed before any work starts, so the invoice matches the quote. Call (844) 761-1390 for an exact figure.
We Also Serve Cities Near Denver
We serve Denver and the surrounding communities, including Westminster, Thornton, Lakewood, and Arvada. The same conditions that stress gates here cross city lines, so our technicians handle the whole metro with the same brand-specific approach. If your property sits just outside Denver, call and we’ll confirm coverage for your gate. Estimates are free and the written price is agreed before work begins.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Denver
Builder-grade aluminum gates in newer east-side developments fail at the hinge post because freeze-thaw cycles loosen the footing while UV degrades the operator’s plastic components. A typical job starts with a gate dragging within a year as the post shifts and the hardware gives. We reset the post in proper concrete and check the operator separately. Call (844) 761-1390 for a free estimate.
Yes, and it’s one of the most common upgrades we handle in Denver. The catch is that many gates were installed manual during the build and the power and conduit runs were never buried, so automating means either trenching a power run or going with a solar gate opener retrofit. We’ll walk you through both and price each path. Call for a free measure and a written price.
Denver’s hail-and-wind belt drives a clear post-storm repair pattern: after a Front Range hail cell rolls off the foothills, gates come in torqued out of plumb where wind racked the frame, and operators trip because a hail-bent hinge binds the gate on its track. Repairs after these storms usually run $150 to $450 for realignment, more if the footing needs resetting. Call (844) 761-1390 for an exact quote.
Hinge post rot and loose hardware are the usual culprits in the core neighborhoods, where older wood gates hung on aging masonry or concrete piers dry out under intense UV and dry air. The wood cracks and grays, the hinges pull loose, and the gate sags. Reinforcement and hardware replacement typically run $200 to $550. Call us for a free estimate.
Most automated gates need entrapment protection such as safety photocells and, for sliding or swing gates in many setups, a loop detector, so check what your operator and local rules require. A binding gate without proper sensors can trip the operator or close on an obstruction, which is why we add safety devices when we automate. Our technicians confirm what your system needs. Call (844) 761-1390 for a free estimate.
Get Your Denver Gate Working Again
Whether you’re dealing with a bent hinge after the last hail storm, a sagging wood gate on an old pier, or an operator that’s finally quit, we can diagnose it and give you a straight answer on repair versus replacement. We work on your brand, from Mighty Mule to FAAC, and we handle the electric side that other trades won’t. Call (844) 761-1390 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Arvada.