Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Aurora
A gate that won’t open stops your whole morning. In Aurora, we handle the call whether it’s a wooden privacy gate dragging on a heaved post or an automatic slide gate stuck mid-travel. Our local technicians work on manual and automated systems across the metro, from Original Aurora to the newer southeast tracts, and since we know how these gates were built, we usually know why they’re failing before we arrive. Aurora is a city of very different halves, and the repair needs of each reflect that. Call (844) 761-1390. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Aurora Homeowners Call Gate Repair Arvada for Gate Repair
We’ve built our reputation in Aurora by doing the unglamorous part of the job: figuring out whether the problem is the operator, the control board, the safety sensors, or the gate itself. Most callers have already been told by someone else that they “just need a new gate.” Often they don’t. Our technicians have up to experience and diagnose before recommending anything.
What sets us apart locally is brand range. In Aurora, we work on the same LiftMaster and Linear operators running in older neighborhoods and the FAAC and BFT systems found at apartment complexes near Colfax and beyond. We’re independent and factory-familiar, which means no brand loyalty tips the diagnosis.
We’re licensed and insured, estimates are free, and the price is set before any work starts. When you call from Aurora, we confirm availability the same day and work around your schedule during dispatch hours. For straightforward hinge or alignment work, same-day service is often possible.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Aurora
Sliding Gate Repair in Aurora often starts with an operator that runs but the gate doesn’t move cleanly, or a panel that jumps the track after a hard freeze. The mechanism itself is simple; the failure usually isn’t. Our technicians check the motor, the control board, the rollers, and the track alignment in one visit, then tell you exactly what failed and what it costs to fix. A typical sliding gate repair in Aurora runs $220 – $480 depending on whether it’s mechanical or an operator and control-board issue. We set the price in writing before any work begins.
Tracks, Rollers, and Ground Movement
Expansive clay soils across the Front Range heave in wet springs and sink in drought, and slide gates feel every shift. When a track goes out of level, the gate drags, the motor works harder, and safety sensors refuse to line up. Realigning the track and checking the post footings usually costs less than replacing an overloaded motor later.
What the Operator Is Telling You
A gate that stops mid-travel or reverses unprompted is often a sensor or loop-detector fault, not a motor failure. On Aurora systems we’ve worked on, a single misaligned photocell can trigger a full shutdown. We test the whole control circuit before swapping parts.
Wrought Iron Gate Repair in Aurora
Wrought Iron Gate Repair in Aurora covers everything from a hinge pulling out of a masonry pillar to rust eating through a bottom rail. Iron gates are durable until moisture works into a weld or a hinge bracket, and then failure happens fast. We weld, realign, replace hinges and hardware, and treat surface rust before it becomes structural. A typical wrought iron gate repair in Aurora runs $180 – $450, with re-welding and refinishing across multiple panels priced higher.
Welds, Hinges, and Bind Points
Older iron gates in Aurora fail where salt-free but wet winter weather gets into joints and freezes. Hinges loosen, welds crack, and the gate starts to bind. We re-weld on site where possible and replace hardware that’s beyond saving.
Alignment and Swing Clearance
A gate that clears the ground in July can scrape it in January after the post shifts. Realignment addresses the post, the hinge side, and the latch side together. A gate that only needed a hinge tightened will tell us so.
Trusted Brands We Service in Aurora
When your gate operator fails, brand familiarity decides how fast it gets fixed. Our technicians work on LiftMaster, FAAC, BFT, and Linear systems regularly, alongside other common residential and commercial platforms. We don’t stock parts – we diagnose the failure, order what’s needed, and return to install it. That means the first visit is diagnostic, the second is the repair, and the price is set in writing before anything is ordered. For Aurora homeowners and property managers, that’s the difference between a technician guessing and a technician knowing your system.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Aurora Homes
- Heaved posts in expanding clay soils. Aurora’s clay shifts with moisture, lifting or dropping hinge posts and throwing gates out of alignment. Slide gates then trip their safety photocells; swing gates drag.
- Freeze-thaw damage at the hinge post. Water works into hinge joints and wood grain in winter, then expands and cracks the wood apart in spring. Hinges loosen, screws strip, and gates sag after a hard freeze.
- Nailed wooden gates coming apart. In older subdivisions, many original gates were nailed rather than screwed. Over decades of freeze-thaw, nails back out faster, and a gate that looked fine in fall can be dragging by spring.
- Builder-grade operators without power protection. In newer southeast Aurora tract homes, gate operators often run on undersized power runs with no surge protection. One bad storm takes out the control board.
Pricing for Gate Repair in Aurora, CO
Gate repair in Aurora runs from about $150 for a hinge or latch fix to $600 or more for operator or control-board work. The biggest variables are whether the failure is mechanical or electrical, how many components are involved, and whether parts need to be ordered. We give you a written estimate before we start, and the number on that estimate is the number you pay. Electric gate repair and operator replacements sit at the higher end because they combine labor, parts, and testing. Wooden gate realignment and hinge replacement sit lower. For a precise figure, call (844) 761-1390 – estimates are free and set per job.
We Also Serve Cities Near Aurora
Our gate repair team covers Centennial, Denver, Lone Tree, and Highlands Ranch alongside Aurora. If you’re in one of these areas and your gate needs work, the same brand knowledge, diagnostic approach, and written pricing apply. No surprises, no handoffs.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Aurora
Builder-installed gates in newer Aurora developments often went in without pre-run power and conduit, so automating them means either trenching a new line or choosing a solar gate opener. It’s a real cost hurdle that builders don’t always flag at purchase. Call (844) 761-1390 for a free estimate on your automation options.
Freeze-thaw cycles and expansive clay soils put the most stress on the hinge post. Wood absorbs moisture, expands, then cracks, and the post itself can heave or sink with the soil. Older nailed gates fail faster than screwed ones. Call (844) 761-1390 for a free estimate.
Proper entrapment protection means at least one obstruction sensor works when tested, and the gate reverses or stops when it should. If the gate reverses randomly or won’t close, that’s often the safety sensor. We test the full safety circuit on every automatic gate visit. Call (844) 761-1390 for a same-day check if the gate isn’t responding normally.
Solar openers are a practical choice where trenching a new power line would cost too much, which is common in newer southeast Aurora builds. They cost more upfront than a wired operator but skip the trench entirely. We work on solar-powered systems and can tell you whether your gate is a good candidate. Call (844) 761-1390 for a free estimate.
In Aurora we regularly work on LiftMaster, FAAC, BFT, and Linear, along with other residential and commercial brands. Brand doesn’t limit us – we diagnose across the full range. Call (844) 761-1390 and tell us what you have.
If your gate is dragging, reversing, or refusing to open, call (844) 761-1390 for a free estimate. We answer 24/7, and fast dispatch from 7am to 7pm runs Sunday through Friday. The price is quoted and agreed before any work starts, so you know what you’re paying for before a technician picks up a tool. Gate Repair Arvada is licensed and insured, and our technicians have up to experience working on the specific gate systems Aurora homeowners actually have.
Written by the team at Gate Repair Arvada.