Gate Repair Cost in Arvada - Honest Price Ranges, Free Written Quote

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 761-1390

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (844) 761-1390

How Much Does Gate Repair Cost in Arvada?

Gate repair in Arvada typically runs $185 to $720 for most residential fixes, with a failed operator board, a bent slide track, or a hinge and latch rebuild all landing inside that band. Simple adjustments and sensor alignment usually come in under $250, while commercial-grade control board work on DoorKing or FAAC systems can push toward $900. Every job is priced from a written estimate after we diagnose the actual failure, so the number you get is the number you pay.

Key Takeaways

  • Most residential gate repairs in Arvada fall between $185 and $720.
  • Electric gate repair and control board work sit at the higher end of the range.
  • Residential-grade systems (Mighty Mule, Ghost Controls) cost less to repair than commercial-grade operators (FAAC, BFT, DoorKing).
  • Repair is almost always cheaper than replacement when the structure is sound.
  • Estimates are free. Call (844) 761-1390. We answer 24/7.

Gate Repair Cost Breakdown (2026)

These ranges reflect what gate repair work tends to cost in the Arvada market in 2026. They’re typical estimates, not exact quotes. The written estimate sets the final price.

Repair Type Typical Cost Range What It Covers
Hinge, latch, and hardware adjustment $185 – $310 Sagging gates, misaligned latches, worn hinges
Roller and track repair (slide gates) $220 – $480 Gate off track, worn rollers, bent track sections
Safety sensor and photo-eye replacement $195 – $350 Gates that reverse, won’t close, or stop mid-cycle
Operator motor repair or replacement $380 – $750 Dead motors, grinding drives, residential swing and slide
Control board and circuit board repair $420 – $900 DoorKing, FAAC, BFT, and other commercial-grade panels
Access control and loop detector work $350 – $850 Keypads, remotes, entry loops, phone entry systems
Gate arm and barrier repair $260 – $600 Broken arms, limit switches, barrier operator faults

What drives the number up or down is almost never the size of the gate. It’s the operator. A residential Mighty Mule or Ghost Controls system with a bad sensor is a quick, inexpensive fix. A commercial DoorKing control panel that needs board-level diagnosis takes more time, more testing, and a more expensive part. Manual gates with a sagging hinge sit at the bottom of the range. Automated swing and slide gates with integrated access control sit at the top.

Our technicians have up to experience across nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters for pricing because familiarity with a specific board or motor means we diagnose the failure directly instead of replacing parts on a guess.

What Affects Gate Repair Pricing in Arvada

  • Residential vs. commercial operator. A residential-grade motor repair typically lands between $380 and $550. The same fault on a commercial-grade FAAC or DoorKing system can run $600 to $900 because the parts and diagnostics are heavier.
  • Where the failure sits. If the fault is in the operator, the control board, the safety sensors, or the mechanical structure, it changes both the part cost and the labor. Cross-brand diagnostics find the actual failure instead of assuming the most common one.
  • Manual vs. automated gate. A manual gate with a hinge or latch problem is usually a hardware fix in the $185 to $310 range. Once an operator is involved, the labor and parts climb.
  • Part availability and brand. Wide brand coverage means we can usually source the right board or motor without swapping whole systems, which keeps the repair in a lower band.
  • Gate weight and structure. Heavy slide gates that have come off the track take more than a roller swap. A bent track or a stressed post adds labor on top of the part.
  • Number of faults. A single sensor fix is cheap. A gate that fails because of a bad board plus a worn drive plus a misaligned track is three problems, not one.
Want to talk it through?Free estimate, price agreed before work starts
Call (844) 761-1390

How to Save on Gate Repair

The biggest savings usually come from fixing the exact failure instead of replacing the whole operator. That’s why we lead with repair first: find the specific component that failed, quote the part and labor, and only recommend replacement when the motor or structure genuinely can’t be saved. That approach keeps most residential repairs in Arvada well under $500.

  • Get the diagnosis right the first time. A free estimate costs you nothing and prevents the guess-and-replace cycle that runs up bills. Call (844) 761-1390 to book one.
  • Address small faults early. A sensor that occasionally trips or a hinge that starts to sag is a cheap fix now. Left alone, it strains the operator and turns into a motor or board repair.
  • Ask whether a part or a whole operator is the smarter move. Sometimes a control board is the better repair cost. Sometimes it’s worth replacing a motor that’s near the end of its life. We’ll tell you which and price both.
  • Keep the brand in scope. If you already own a LiftMaster, Linear, Elite, or Viking system, we can service it directly. You don’t need to replace a working brand just to get it fixed.

Can You Repair My Specific Gate Brand?

Yes. We work on your brand, whether it’s a residential Mighty Mule on a single-family driveway or a commercial DoorKing operator on an HOA or apartment gate. Electric gate repair is a specialty, not a side service. Our technicians diagnose across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.

That matters when a gate behaves intermittently. A gate that reverses for no clear reason could be a photo-eye, a control board, a wiring fault, or a mechanical bind. We test each of those instead of defaulting to the most common replacement. The result is a repair price based on the real failure, not on brand loyalty or a hunch. Full scope runs from the motor to the control board, and from emergency repair through permanent installation, so you don’t need a second vendor when the system grows.

Repair or Replace? A Cost Comparison

In most cases, repair is the cheaper path. A control board repair at $420 to $900 is less than a new commercial operator installation. A $380 to $750 motor repair on a residential gate is well below replacement of the whole system. Replacement makes sense when the structure is compromised, the operator is at the end of its life, or repeated failures keep adding up to more than a new install over a short stretch.

We price both when it’s close. You get the repair number and, if replacement is a real option, the installation number beside it, then you decide. For the broader picture on how these jobs go in this city, see Gate Repair Arvada.

Do You Serve HOAs and Commercial Properties in Arvada?

Yes. Residential or commercial, manual or automated, we handle both. HOAs, apartment complexes, and light-commercial properties running commercial-grade operators like DoorKing, FAAC, BFT, or Viking get the same component-level diagnostics as a homeowner’s Mighty Mule. Commercial gates fail on access control, loop detectors, and phone entry far more often than on the motor itself, and that’s where the expertise matters for keeping the price honest.

If you manage a gate that’s stuck, intermittent, or failing on entry, the fastest path is a call. Call (844) 761-1390. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is often possible, and the estimate is free. For scheduled or planned work, you can also book through gate repair.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (844) 761-1390

What Happens When You Call

When you call (844) 761-1390, we ask what the gate is doing: won’t close, reverses, dead motor, off track, or access control failing. From there we book a diagnostic. The technician tests the operator, the control board, the safety sensors, and the mechanical structure on site, then gives you a written estimate before any work starts. The estimate is free and sets the price. Same-day service is common for straightforward failures.

A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.

FAQs – Gate Repair Cost

How much does gate repair cost in Arvada?

Most residential gate repairs in Arvada cost between $185 and $720, and commercial-grade control board or motor work can reach $900. The exact figure depends on which component failed: hardware, sensors, operator, or board. Call (844) 761-1390 for a free estimate.

Is it cheaper to repair or replace a gate operator?

Repair is usually cheaper: a $380 to $750 motor repair or a $420 to $900 board repair typically beats a full operator replacement. Replacement makes sense when the motor is at the end of its life or the structure is compromised. We’ll price both so you can compare.

How much does an electric gate repair cost in Arvada?

Electric gate repair in Arvada typically runs $195 to $900 depending on the failure, with sensor and photo-eye fixes at the low end and control board or access control work at the top. Call (844) 761-1390 to confirm your system’s estimate.

Can you come today?

Same-day service is often available for common gate failures in Arvada. Call (844) 761-1390 and we’ll book the soonest opening. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Do you charge for estimates?

No. Estimates are free, and the written estimate sets the price before any work begins. There’s no separate fee to get the number. Call (844) 761-1390 to schedule yours.

Can you repair commercial gate systems like DoorKing or FAAC?

Yes. We service commercial-grade operators including DoorKing, FAAC, BFT, and Viking, along with residential-grade systems like Mighty Mule and Ghost Controls. Repairs on those commercial systems typically run $420 to $900 for board and access control work. Call (844) 761-1390 for a commercial estimate.

Get a Free Gate Repair Estimate in Arvada

Whether your gate is a residential swing system on a Mighty Mule operator or a commercial slide gate on a DoorKing board, we diagnose the actual failure and quote the repair before we touch it. Estimates are free, the price is set by the written estimate, and repair comes first. Call (844) 761-1390. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening.

Pricing reflects the Arvada market as of 2026. Gate Repair Arvada offers free estimates – call (844) 761-1390.

What Our Customers Say

★★★★★ 4.7 from 10+ reviews

"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."

- Amanda Ziegler

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Ebony Jackson

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

- Diego Herrera
Need Gate Repair help in Arvada? Licensed & insured · same-day response · free estimates
Call (844) 761-1390

Request a Free Estimate

Tell us what's going on in Arvada. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7