Gate Motor & Opener Cost in Arvada - Honest Price Ranges, Free Written Quote

Typical price ranges for the work, then a free on-site estimate and a written quote for your driveway. Site prep, power runs and safety gear priced in, not added later.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (844) 761-1390

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate
Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your gate repair?Free estimate, price agreed before work starts
Call (844) 761-1390

How Much Does Gate Motor & Opener Cost in Arvada?

A new gate opener installed in Arvada typically runs $950 to $2,400 for a single residential swing gate, and $1,600 to $4,200 once you move into heavy-duty slide operators and commercial-grade systems. Repairing an existing motor, control board or safety sensor is usually $180 to $650, which is why we diagnose before we quote. A written estimate sets the final price on every job, and it’s free.

Those numbers cover the whole job, not just the box: the operator, the arm or chain, wiring, safety sensors, and the labor to mount and set travel limits. What changes the figure is your gate’s weight, how it swings or slides, and which brand is already bolted to the post. We work on nine of them by name, from Mighty Mule and Ghost Controls on a single-family entry to DoorKing and FAAC on a multi-unit complex. That matters in Arvada, where a lot of properties sit at the boundary between a residential yard and a shared-access drive.

Key Takeaways

  • Residential swing opener installed: $950 – $2,400. Slide opener installed: $1,300 – $3,200. Commercial-grade: $1,600 – $4,200 and up.
  • Motor or control board repair: $180 – $650 typical. Safety sensor and loop-detector problems: $150 – $400.
  • Electric gate repair is a specialty here, not a side service. We handle the operator, the access-control board, the sensors and the mechanical structure.
  • Our technicians have up to experience across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems.
  • Estimates are free, and we repair first when a repair will hold.

Gate Motor & Opener Cost Breakdown (2026)

Here’s how the costs break out by job type. These are typical Arvada market ranges for 2026, and each one assumes a standard single gate unless the line says otherwise. The written estimate is what you actually pay.

Job Typical Cost Range
Diagnostic visit and written estimate (failure traced to the operator, board, sensors or hardware) Free
Control board replacement (LiftMaster, Linear, Elite) $280 – $650
Motor or gear assembly replacement, residential $320 – $780
Safety sensor, photo-eye or loop detector replacement $150 – $400
Battery and backup power service on a solar or battery operator $160 – $450
Residential swing opener, supplied and installed (Mighty Mule, Ghost Controls, LiftMaster) $950 – $2,400
Residential slide opener, supplied and installed (Viking, FAAC) $1,300 – $3,200
Commercial-grade slide or swing operator installed (FAAC, BFT, DoorKing) $1,600 – $4,200 and up
Access control integration (keypad, remote receiver, entry system) $250 – $900
Arm, chain and hardware rebuild $220 – $700
Full removal and replacement of a failed operator $900 – $2,800

A few things push the number toward the top of a range. A gate that has sagged or shifted puts load on the operator from day one, and we won’t install a new motor on a hinge that’s dragging because it will fail early. Long wire runs from the house to the gate cost more in cable and labor than a gate that sits near the panel. And heavy steel or ornamental panels need a heavier operator and sometimes a different mounting setup than a light aluminum frame.

What pulls it down: an existing operator that’s in good shape but has a single failed part. That’s the repair-first scenario, and it’s common. A board, a sensor or a limit switch swap is a fraction of a new install. If you’re not sure which side of that line you’re on, start with gate repair in Arvada and let a technician trace the failure before anyone quotes a replacement.

Want to talk it through?Free estimate, price agreed before work starts
Call (844) 761-1390

What Affects Gate Motor & Opener Pricing in Arvada

Arvada sits on a stretch of the Front Range where the ground moves with the seasons. Clay-heavy soils expand when they soak and contract when they dry, and that shows up in gate posts and slabs. It’s one of the reasons a gate that worked fine in spring can bind in late summer. Here are the factors that move the price most.

  • Gate weight and material. A light aluminum residential gate can run a Mighty Mule or Ghost Controls operator. A heavy steel or cedar panel needs more torque, a reinforced mount, and often a heavier arm or chain drive. Weight is the single biggest price lever on an install.
  • Swing versus slide. Slide operators generally cost more in parts and labor than swing arms, and they need a level track. On sloped Arvada driveways, a slide gate often needs track work or a different operator than the homeowner expected.
  • Brand and platform. The nine brands we service don’t price the same. Residential entry-level operators are cheaper to buy and replace. Commercial-grade platforms like DoorKing and FAAC cost more up front but are built to cycle far more often, which is the right call for an HOA or apartment entrance.
  • Post and hinge condition. If the post has settled or the hinges are worn, that’s structural work on top of the operator. We’d rather fix the mechanics first than sell a motor that fights a dragging gate.
  • Power and wiring. Distance from the power source, whether conduit already exists, and whether the run crosses a driveway or landscaping all affect labor. A gate with power already at the post is a simpler job.
  • Access control and safety devices. Photo-eyes, loop detectors, keypads and remote receivers are priced separately because they’re separate components. A basic residential setup needs fewer of them than a commercial entrance with vehicle detection.
  • Manual versus automated conversion. If the gate is currently manual, the operator, wiring and safety gear is a full install. If it’s already automated and the operator failed, you may be looking at a repair instead.

The Arvada side of this is real but manageable. Neighborhoods with older housing stock and mature trees tend to have gates that have been worked on more than once, sometimes with mismatched parts from a previous fix. We see that a lot around Olde Town and the older blocks off Wadsworth, where an operator might be one brand and the safety sensors another. Cross-brand diagnostic ability is what untangles that: we can tell whether the failure is in the operator, the access-control board, the sensors or the gate itself, without assuming it’s whatever brand happens to be on the label. If you’re on the west side near Ralston Creek or up toward Candelas, the wind exposure across open lots also matters for gate travel and sensor alignment, and that’s a setup issue more than a parts cost.

How to Save on Gate Motor & Opener

The biggest savings come from diagnosing before replacing. A technician who can trace a failure to a $200 board saves you a $2,000 install. A few practical moves:

  • Get the failure traced, not guessed. Intermittent gate behavior has specific causes: a failing limit switch, a misaligned photo-eye, a weak battery in a solar operator, a loose connection at the board. Guessing at a brand-level “replace the motor” wastes money. Our free estimate includes tracing the actual failure.
  • Repair the mechanics before the electronics. A sagging gate or worn hinge accelerates motor wear. Fixing the hardware first can extend the life of the operator you already own.
  • Match the operator to the gate, not the sales sheet. An oversized commercial operator on a light residential gate isn’t a saving, and an undersized residential unit on a heavy gate fails early. The right size is the cheaper long-run choice.
  • Ask about component-level repair. Control boards, sensors, receivers and arms are often replaceable individually. You don’t always need a whole new operator.
  • Bundle the access control if you’re installing anyway. If a new operator is going in, adding or refreshing a keypad or receiver at the same time avoids a second visit later. It’s not a discount, just less labor overall.
  • Keep the gate aligned. Seasonal ground movement in Arvada means checking post alignment and hinge play before winter. Small adjustments cost less than the motor wear they prevent.

We give free estimates, so the cheapest first step is a call. Reach us at (844) 761-1390 and we’ll trace the problem and put a number on it before any work starts.

Need a price for your gate repair?Free estimate, price agreed before work starts
Call (844) 761-1390

Can You Repair My Gate Opener Instead of Replacing It?

Usually yes. Most gate opener failures we see are one component, not the whole unit: a control board, a limit switch, a safety sensor, a battery, or a worn arm. Those repairs typically land between $150 and $780, well below a new install. Replacement makes sense when the motor or gearbox itself is worn out, when the operator is undersized for the gate and keeps failing, or when parts for that platform are no longer available.

We repair first when a repair will hold, and that’s a diagnostic decision, not a sales one. A technician traces the failure from the motor to the control board and tells you which side of the line you’re on. Call (844) 761-1390 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

How Much Does a Commercial Gate Operator Cost in Arvada?

A commercial-grade slide or swing operator installed in Arvada typically runs $1,600 to $4,200 or more, depending on the platform and the access control around it. DoorKing, FAAC, BFT and Viking systems are built for higher cycle counts, which is what an HOA entrance, apartment complex or light-commercial property needs. The operator is only part of the cost; loop detectors, entry systems and safety devices are priced with it because they’re part of a working install.

For property managers, the cheaper path is often servicing the existing commercial operator rather than replacing it. A board or sensor repair on a DoorKing or FAAC unit is a fraction of a new install and keeps the entrance running. We handle residential and commercial, manual and automated, under one scope. Call (844) 761-1390 for a free estimate.

FAQs – Gate Motor & Opener Cost

How much does it cost to install a gate opener in Arvada?

A residential swing gate opener installed in Arvada typically costs $950 to $2,400, and a slide opener runs $1,300 to $3,200. Commercial-grade operators installed start around $1,600 and go past $4,200 for heavy-duty systems. The written estimate sets the final price, and it’s free. Call (844) 761-1390 for an exact quote.

Is it cheaper to repair or replace a gate motor?

Repair is usually cheaper. Most opener failures are a single component, and those repairs typically cost $150 to $780, against $950 or more for a new install. Replacement is the better call when the motor or gearbox is worn out or the operator is undersized for the gate. A free diagnostic tells you which one you’re facing.

How much does an electric gate repair cost in Arvada?

Electric gate repair in Arvada typically ranges from $150 to $780 depending on the component. Safety sensors and photo-eyes sit at the low end, control boards and motor assemblies at the high end. This is a core specialty for us, covering the operator, the access-control board, the sensors and the mechanical structure. Call (844) 761-1390 for a free estimate.

Do you work on my gate brand?

We work on nine gate brands by name: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. That spans entry-level residential systems like Mighty Mule and Ghost Controls through commercial-grade platforms like DoorKing and FAAC. Our technicians have up to experience and can trace a failure across mismatched brands on the same gate. Call (844) 761-1390 to confirm your model.

Can you come today?

Same-day service is often possible, and the fastest way to find out is to call. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 761-1390 and we’ll give you a free estimate.

What does a diagnostic visit cost?

The estimate is free. We trace the failure, tell you whether it’s a repair or a replacement, and put a written price on the job before any work starts. Call (844) 761-1390 to set one up.

Get a Free Gate Motor & Opener Estimate in Arvada

Whether your operator has quit, your sensors keep tripping, or you’re ready to automate a manual gate, the first step is a free estimate with a real number on it. We service homes, HOAs and commercial properties across Arvada, and we handle diagnosis, repair and new installation under one scope so you don’t get handed off to another contractor. From the motor to the control board, residential or commercial, manual or automated, we work on your brand.

Call (844) 761-1390 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday.

Pricing reflects the Arvada market as of 2026. Gate Repair Arvada offers free estimates – call (844) 761-1390.

Written by the team at Gate Repair Arvada.

What Our Customers Say

★★★★★ 4.7 from 10+ reviews

"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."

- Amanda Ziegler

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Ebony Jackson

"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."

- Diego Herrera
Need Gate Repair help in Arvada? Licensed & insured · same-day response · free estimates
Call (844) 761-1390

Request a Free Estimate

Tell us what's going on in Arvada. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7