Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Denver, CO
Denver gate work starts with the weather and the housing stock. Driveway gates on brick bungalows in Park Hill and Montclair sit on masonry piers that have moved for a century, while newer vinyl and aluminum gates out east fail at hinges and operators instead. Then the Front Range hail belt bends frames and racks gates out of plumb every storm season. We install, repair, and diagnose gate systems across Denver, matching the hardware to the lot. Call (844) 761-1390 for a free estimate.
Why Denver Homes Are Different
Denver sits at 5,280 feet, and that elevation changes what happens to a gate. UV is intense, the air is dry, and temperatures swing more than 40 degrees in a day. Wood gates dry, crack, and gray out fast. Steel hinges and operators loosen and seize as the metal moves with the swing. Add 300-plus sunny days and rapid freeze-thaw cycles, and gate hardware takes a beating that coastal or lowland installs never see.
The housing stock sets the job. Core neighborhoods like Park Hill, Montclair, and South Park Hill (80207, 80220, 80206) are full of 1920s-40s brick bungalows, Tudors, and Denver Squares on narrow lots, with detached garages reached by long driveways. That means older wood and wrought-iron driveway gates hung on aging masonry or concrete piers. Newer development out east and far northeast brings vinyl privacy fencing and builder-grade aluminum gates that fail at hinges and operators rather than at the fabric. Summer afternoon thunderstorms and hail routinely batter gates and knock them out of alignment, and heavy wet spring snow loads bend lighter gate frames. The post-storm pattern is specific in Denver: after a hail cell rolls off the foothills, driveway gates show up torqued and out of plumb, and operators trip because a hail-bent hinge binds the gate on its track.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Denver Services
Most Denver homeowners call us about two things: fixing a gate that has stopped working, and fixing the operator that moves it.
Gate Repair in Denver
Manual and automated gates in Denver fail at the structure more often than the operator. That means hinges binding on old piers, posts loosened by freeze-thaw, gates racked out of plumb after hail-driven wind, and latches that no longer line up. We look at the whole gate, not just the part that stopped moving, and we identify whether the problem is the frame, the hinge, the pier, or the operator. Our technicians have up to experience with residential and commercial gate systems. For structural repair on your gate, see gate repair in Denver.

Electric Gate Repair in Denver
Electric gate repair is a specialty, not a side service. We work on the motor, the control board, the safety sensors, and the access-control system, and we diagnose which one actually failed instead of guessing. Denver’s temperature swings matter here: operators that worked fine in spring trip in January when a bent hinge drags and the motor reads it as an obstruction. We handle circuit boards, loop detectors, and motor assemblies that general handymen usually decline. For automated systems across the metro, see electric gate repair and we’ll walk you through the diagnosis.

Gate Installation in Denver
Installing a gate in Denver means matching the new hardware to a lot that was laid out for a horse and carriage and a house built before 1950. Long narrow driveways behind brick bungalows in Park Hill and Montclair leave little room for a slide gate to travel, so swing operators or a shorter slide run with a proper footing are often the answer. Out east in newer development, vinyl and builder-grade aluminum gates need operators and hinges sized for frames that flex more than steel. With 300-plus sunny days, intense UV, and freeze-thaw cycles across the year, the install has to account for wood drying and steel moving. That’s the real value of a proper Gate Installation here: hardware chosen for the lot and the climate, not a box lifted off a shelf.
Automatic Gate Installation
Automating an existing gate, or fitting a new one with an operator from the start, has to account for how the gate already hangs.
Signs you need it
You’re manually opening a heavy driveway gate every day, or you want keypad and remote entry without changing the gate itself.
What it costs in Denver
Automatic gate installation typically runs $2,800 to $6,500 in Denver, depending on the operator, the gate weight, and whether the power run is already in place. The written estimate sets the final price.
How we do it
We measure the gate, check the piers and footing, choose an operator rated for the gate’s weight and travel, run the power and safety edges, then set the limits and test the reverse.
Driveway Gate Installation
A new driveway gate on a narrow Denver lot is as much a footing job as a gate job.
Signs you need it
Your existing gate is racked, rusted through at the hinges, or has been repaired past the point where a new one makes more sense.
What it costs in Denver
Driveway gate installation typically runs $2,500 to $6,000 in Denver, with the range set by gate material, span, and whether masonry or concrete piers need rebuilding. The written estimate sets the final price.
How we do it
We set posts to proper footing depth for the gate’s weight, hang the gate plumb on the piers, check the swing over the full travel, then fit hinges and a latch that hold through freeze-thaw.
What Gate Installation Costs in Denver
| Item | Typical range in Denver |
|---|---|
| Automatic gate installation | $2,800 – $6,500 |
| Driveway gate installation | $2,500 – $6,000 |
| Sliding gate installation | $3,000 – $7,000 |
Can you install a gate on a narrow Denver lot with an old driveway?
Yes. Many Park Hill and Montclair driveways are long and narrow with little swing room, so a slide gate on a short track or an in-swing operator sized to the pier spacing often fits better than a full swing. We measure the lot before recommending anything.
How long does a gate installation take in Denver?
Most residential gate installations in Denver are measured, ordered, and scheduled rather than done same-day. A straightforward driveway gate with an operator usually takes one to two days on site once the gate and hardware arrive. Call (844) 761-1390 for a free measure and a written price.
Brands We Service in Denver
We work on your brand, not just the ones we install. We know LiftMaster and Linear residential operators, and FAAC and BFT commercial-grade systems, across the nine brands we handle. That breadth is why diagnosis moves faster: we check the operator, the access board, the sensors, and the structure in one pass. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Denver, CO
| Service | Typical range in Denver |
|---|---|
| Automatic gate installation | $2,800 – $6,500 |
| Driveway gate installation | $2,500 – $6,000 |
| Sliding gate installation | $3,000 – $7,000 |
| Electric gate repair (diagnostic and fix) | $180 – $650 |
| Gate operator repair | $250 – $800 |
| Control board replacement | $300 – $900 |
| Safety sensor and loop detector repair | $150 – $500 |
| Hinge, latch, and hardware repair | $120 – $400 |
| Gate realignment and post repair | $200 – $700 |
What pushes price up in Denver is usually the structure, not the operator: rebuilding a settled masonry pier, re-setting a post to proper footing depth, or re-hanging a hail-racked frame takes more labor than swapping a control board. We quote the price and agree it with you before any work starts, and the free written estimate sets the final number.
Neighborhoods We Serve in Denver
We install and repair gates across Denver’s core and out through the newer east-side and far-northeast development. The work is different in each: brick bungalow driveways with older wood and wrought-iron gates on aging piers in the center, vinyl and aluminum gates on builder-grade hinges out east. Fast dispatch from 7am to 7pm, Sunday through Friday, across the metro.
- Park Hill
- Montclair
- South Park Hill
- Capitol Hill
- Berkeley
Service Area – Cities Near Denver
Denver work doesn’t stop at the city line. The same hail belt and freeze-thaw cycle hit the surrounding suburbs, and the same brick bungalows and long driveways turn up across the metro. We also take gate installation and repair calls in Westminster, CO, Thornton, CO, Lakewood, CO, and Arvada, CO. If you’re just outside the city and not sure whether you’re in range, call and we’ll tell you.
Serving Denver, CO – Our Local Coverage Area
We serve Denver and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Denver
We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm, and we run fast dispatch from 7am to 7pm on scheduled repair days. Call (844) 761-1390 and we’ll book you in.
Most gate installations that involve new electrical work, a new structure, or a change near the property line can require a permit. Rules vary by project and neighborhood, so confirm with the City and County of Denver building department before work starts. We’ll tell you what the install involves so you know what to ask.
Yes. We handle residential-grade operators like Mighty Mule and Ghost Controls as well as commercial-grade systems from FAAC, BFT, and DoorKing, which is what most HOAs and multi-unit Denver properties run. We diagnose the access board, the loop detectors, and the operator from the motor out.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Denver Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amanda Ziegler"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ebony Jackson"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Herrera