Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Aurora, CO
A gate that closes squarely, latches without a shove, and runs on an operator that does exactly what you ask is a simple thing to want. Getting there in Aurora takes someone who knows what the city does to gates. Wooden privacy gates on quarter-acre lots, built with the house in the 1970s through the 2000s, take a beating from Front Range freeze-thaw and clay soil that never stops moving. We diagnose the actual failure and fix it, and when replacement is the honest answer we measure and install. Call (844) 761-1390 for a free estimate.
Why Aurora Homes Are Different
Aurora spans a huge range of housing in a short drive. Original Aurora and Hoffman Heights hold split-levels and ranches from the 1970s, while the southeast stretches out into tract homes built through the 2000s. What ties them together is the type of gate: wooden privacy gates are the norm, and many are still the ones that came with the house. In the older subdivisions around Hoffman Heights and Original Aurora, those gates are often nailed rather than screwed, so they loosen faster and sag sooner.
The climate works against them. Aurora’s semi-arid weather swings through hard freeze-thaw cycles each winter and spring. Moisture gets into wood and metal joints, then expands and contracts, and hinges back out while wood splits. The region’s expansive clay soils push fence posts sideways, and the movement is worst after a wet spring or a long dry stretch. After a typical spring blizzard, sagging gates and snapped hinges show up across the 80010-80014 ZIPs. Material choice and footing depth matter more here than they would in a milder climate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Aurora Services
Most calls we take in Aurora come down to two jobs: getting an existing gate working again, or getting the electric system behind it working again.
Gate Repair in Aurora
Sagging, dragging, sticking and rotten wooden gates are the everyday work here. We look at the whole assembly rather than one hinge: post movement from clay soil, split wood at the fastener points, worn hardware, and a frame that has twisted out of square. On the older nailed gates around Hoffman Heights and Original Aurora, part of the fix is replacing nails with proper fasteners so the repair holds through another freeze-thaw season. Adjusting or replacing hardware on a gate that has dropped is often all that stands between you and a new gate. For the details, see gate repair.

Electric Gate Repair in Aurora
When a gate has a motor, the failure is usually in one of four places: the operator, the control board, a safety sensor or the mechanical structure. We test each in turn instead of guessing. That matters on LiftMaster and Linear residential arms as much as on FAAC and BFT operators running multi-unit entrances. We handle circuit boards, control panels, loop detectors and motor assemblies, and we’re clear about when a board is worth repairing versus replacing. If you’d rather leave the diagnosis to someone who does this daily, start with electric gate repair.

Gate Installation in Aurora
New gate work in Aurora is shaped by what’s already there. On the quarter-acre lots across the city’s 1970s-90s subdivisions, a new gate usually means dealing with an old fence line, heaving posts and clay that has been shifting since before the house was built. In the newer master-planned communities to the southeast, the ground is less settled but the wind and freeze-thaw still punish anything hung without proper footing depth. Whether it’s a manual driveway gate or a fully automated entrance, we measure the opening, talk through how you want to open it, and price the job in writing before anything is ordered. For the full picture of what we build, see our Gate Installation page.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car in the rain every time, or you want a driveway that closes itself behind guests and deliveries.
What it costs in Aurora
Automatic gate installation typically runs $2,800 to $6,500 in Aurora, depending on the operator and whether power is already at the post.
How we do it
We survey the opening, confirm footing depth and power, hang and level the gate, mount the operator, set the limits and safety edges, and test the full cycle before we leave.
Driveway Gate Installation
Signs you need it
Your old driveway gate is rotted at the bottom rail, twisted out of square, or letting the dog through the gap.
What it costs in Aurora
A new driveway gate typically costs $1,800 to $4,200 installed in Aurora, with the figure set by the written estimate after we see the opening.
How we do it
We pull the old gate, check and reset the posts for the clay soil, build or set the new gate square, and align the latch and hardware so it swings and closes clean.
What Gate Installation Costs in Aurora
| Item | Typical range in Aurora |
|---|---|
| New driveway gate installed | $1,800 – $4,200 |
| Automatic gate installation | $2,800 – $6,500 |
| Gate operator installation (existing gate) | $1,200 – $3,000 |
Can you install a gate on clay soil without it shifting?
Yes, when the posts go to proper footing depth and are set for the soil, not just driven into the surface. Expansive clay moves seasonally, so depth and bracing are the difference between a gate that stays square and one that drags within a year.
Do I need a permit to install a gate in Aurora?
Most cities require a permit for a new fence or gate of significant height, and HOAs often have their own rules on style and placement. Ask the City of Aurora building department and check with your HOA before ordering materials. We can walk you through what the job involves.
Brands We Service in Aurora
We work on the brands Aurora homes and properties actually run. That includes LiftMaster, FAAC, BFT and Linear, along with residential-grade systems like Mighty Mule and Ghost Controls and commercial-grade platforms like DoorKing and Viking. Cross-brand diagnostic work is routine here, so the answer isn’t tied to one line. See our brands for the range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Aurora, CO
| Service | Typical range in Aurora |
|---|---|
| New driveway gate installed | $1,800 – $4,200 |
| Automatic gate installation | $2,800 – $6,500 |
| Gate operator installation (existing gate) | $1,200 – $3,000 |
| Gate repair (hardware, sag, latch) | $150 – $450 |
| Electric gate repair (operator, board, sensors) | $200 – $800 |
Prices in Aurora run higher when the opening needs new posts set into clay, when power has to be run to the gate, or when a commercial-grade board has to be sourced. Whatever the job, we quote before work starts and the written estimate sets the final price, so there are no surprises on the invoice.
Neighborhoods We Serve in Aurora
We handle gate work across Aurora, from the older streets near Original Aurora and Hoffman Heights through the newer subdivisions in the southeast. Our technicians have up to experience with the brands and problems common to this housing stock. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Original Aurora
- Hoffman Heights
- Southeast Aurora (80013)
- Newer master-planned communities to the southeast
Service Area – Cities Near Aurora
Aurora sits close to a lot of the metro, and we take gate work in the surrounding cities as well. If you’re just outside Aurora in one of these areas, we can still help: Centennial, CO, Denver, CO, Lone Tree, CO and Highlands Ranch, CO. Our home base and main service area is Arvada, and you can find more there. Call to confirm coverage for your address.
Serving Aurora, CO – Our Local Coverage Area
We serve Aurora and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Aurora
We dispatch Sunday through Friday, 7am to 7pm, and same-day service is often possible. Call (844) 761-1390 and we answer 24/7, then book you into the next opening. A call outside dispatch hours is booked into the next slot.
We don’t pull permits for you, but we can tell you what a new gate job involves so you know what to ask the City of Aurora building department and your HOA. Check both before ordering materials, since height and style rules vary across the city.
Yes. We cover Aurora from Original Aurora and Hoffman Heights through the southeast subdivisions, and the nearby cities listed above. If you’re unsure whether your address is in range, call and we’ll confirm before scheduling.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Aurora Customers Say
"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Amanda Ziegler"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ebony Jackson"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Diego Herrera